Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
PDFは暗号化されています。
カタログを見るためにPDFを提供します。メールアドレスを提供する必要があります
無料カタログ カタログを見るためにPDFを提供します。メールアドレスを提供する必要があります
Product - ComIoT 07 Wireless Router Core Module Product Specifications V1.2
The ComIoT 07 module is a wireless router core module developed and produced by Shenzhen Movingcomm Technology Co., Ltd. It is a highly integrated small 802.11 b/g/n Wi-Fi gateway module. The Com IoT 07 module integrates Wi-Fi function, network port, serial port, USB and routing system in a low-cost package, and the module can be perfectly applied with only a few simple external circuits. The ComIoT 07 is based on MTK's MT7628 solution, this module integrates 802.11n 2x2 MAC/BB/radio and internal PA and LNA. It supports 802.11n, 20 MHz & 40 MHz channels up to 150 Mbps and 300 Mbps, respectively, and IEEE 802.11b/g protocol data rates. The module supports OpenWRT operating system, supports AP mode and client mode at the same time, and includes various application software to reduce the development and design work of customers.
Product - ComIoT 06 Wireless Router Core Module Product Specifications v1.0
The ComIoT-06 module is a complete small form factor 802.11 b/g/n Wi-Fi solution that optimized for low-cost, low power, highly integrated AP or consumer electronic devices. This module is also a highly integrated small 802.11 b/g/ n Wi-Fi gateway module. ComIoT-06 module integrates Wi-Fi function, network port, serial port, USB and routing system in one package. Only a few simple external circuits are required to apply the module perfectly. This module is based on a single chip QCA9531, which integrates 802.11n 2x2 MAC/BB/radio with internal PA and LNA. It supports 802.11n wireless standard operation up to 150Mbps in the 20MHz channel bandwidth and 300Mbps in the 40MHz channel bandwidth. The Wi-Fi is downward compatible IEEE 802.11b/g wireless standard and data rate. The module supports AP mode and client mode at the same time, including massive service application software that to reduce research and design work of customer.
Product - ComIoT 05 Wireless Router Core Module Product Specifications V1.0
The module ComIoT-05 is a complete, small form factor 802.11 b/g/n Wi-Fi solution optimized for low-cost and highly integrated with high power for consumer electronic devices and products. The module integrated Wi-Fi functions in a single and small form factor which is friendly to low-cost PCB design that requiring only a few external 3.3V & 5V power supply and connection to antenna. The module based on the single chip QCA9531 which integrated with an 802.11n 2x2 MAC/BB/radio with external PA and LNA. It supports 802.11n operations up to 144 Mbps for 20 MHz and 300 Mbps for 40 MHz channel respectively, and IEEE 802.11b/g data rates. The module support AP mode and client mode at the same time. The performance of the module allows to support multiple types of service application and software which can help to reduce a research and design work of a customer.
Product - ComFi W2140 Outdoor 4G Wireless CPE Product Specifications V1.0
High Performance Outdoor 4G Wireless CPE Pole Installation for outdoor application. Support 2.4GHz 2x2 WI-FI, IEEE 802.11b/g/n Wi-Fi standard, up to 300Mbps data rate. Support 4G LTE cellular network, multiple common LTE-FDD and LTE-TDD bands support with LTE Cat4 technology, up to 150Mbps data rate. 1 x RJ45 10/100Mbps Fast Ethernet Network Port, IP68 Waterproof, Support 24V PoE 2 x Type-N Antenna Connector for 2.4 GHz WI-Fi radio. 2 x Type-N Antenna Connector for 4G LTE cellular radio.
Product - ComIoT 23 4G to USB Module Product Specifications V1.0
Com IoT23 series is a 4G industrial core module developed, designed and produced by Shenzhen Movingcomm Technology Co., Ltd. It is a highly integrated small 4G cat4 LTE module. Supporting a maximum downlink rate of 150 Mbps and a maximum uplink rate of 50 Mbps. It has good cost in performance. In addition, it is compatible with multi-network standards LTE and UMTS/HSPA+ and support seamless switching between 4G and 3G networks. This modem in the module is based on the ASR chipset solution. It has rich network protocols, supports multiple drivers, and the USB drivers are suitable for Windows, Linux, Android and other operating systems. It is widely used in the Internet of Things fields such as equipment networking, unmanned self-service equipment, industrial routers, and Raspberry Pi applications. The sim card slot supports NANO SIM and featured with anti-wrong way insertion self-bouncing card slot, better quality and higher durability. Com IoT23 series supports multiple Quectel module series: EC200T series, EC200S series, EC200A series and EC20 series, which can satisfy the frequency band coverage of different countries and regions. Product Features LTE Cat 4 module optimized for M2M and IoT applications Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage MIMO technology meeting demands for data rate and link router core board reliability in modem wireless communication systems 2.4G router module Super cost-effective wireless router module
Product - ComIoT 15H Module Product Specifications V1.1
In today's network world where everything is connected, the demand for data communication will only become stronger and stronger, especially in the field of intelligent industrial control. The ComIoT15H module is a new generation of wireless module launched by Shenzhen Movingcomm Technology Co., Ltd. for the industrial field. With the explosive growth of wireless and a variety of wired high-speed broadband access services, the device provides fast Internet access, and with security, stability, and intelligence, it enables thousands of devices to be easily connected to the Internet. The equipment informatization provides high-speed data transmission and high-speed communication. It supports OpenWRT operating system, simple graphical interface, convenient and quick to use, provide development materials, make product development and embedded applications more convenient. Meet various embedded needs in the IoT industry chain, such as smart grid, smart transportation, smart home, finance, mobile POS terminals, supply chain automation, industrial automation, smart buildings, fire protection, public safety, environmental protection, meteorology, digitalization Medical, remote sensing survey, military, space exploration, agriculture, forestry, water affairs, coal mining, petrochemical and other fields. Product Features Industrial Grade Design The Com IoT15H module uses an industrial-grade 32-bit MIPS processor with enterprise-level data communication processing capabilities, built-in 128MB system memory, 16MB Flash, Dual Band WIFI supports 2.4GHz 802.11n and 5.8GHz 802.11ac wireless protocols that providing a total bandwidth of up to 1200Mbps. Stable and Reliable The Com IoT15H module adopts a software watchdog design to ensure system stability and support long-hour operation. The uplink communication adopts a complete anti-drop mechanism to ensure that the data communication terminal is always active. wireless router module High Power Transmission Design The Com IoT15H module adopts high power dual-band WiFi design. When WIFI 2.4GHz in 802.11b mode, the maximum power can reach 27±1dBm while 5.8GHz in 802.11n mode, the maximum power can reach 22±1dBm. router core board Easy to use The Com IoT15H module provides standard TTL serial, Ethernet, WIFI and USB interfaces, which can be directly connected to serial devices, Ethernet devices and WIFI devices. The WAN port supports PPPoE protocol and can be directly connected to a ADSL device. It supports the OpenWrt OS which is easy to use, flexible, supports multiple working modes, and is convenient for further product development. dual band router module
Product - ComIoT 04 Wireless Router Core Module Product Specifications V1.3
The ComIoT 04 module is a wireless router core module developed and produced by Shenzhen Movingcomm Technology Co., Ltd. It is a highly integrated small 802.11 b/g/n Wi-Fi gateway module. The module integrated with Wi-Fi function, Ethernet interface, Serial interface, USB and router system in a low-cost form factor. It only needs a few simple external circuits to perfectly apply and operate the module. wireless router module The ComIoT 04 2.4G router module is based on Qualcomm QCA9531 chipset. It is integrated 802.11n 2x2 MAC/BB/radio with internal PA and LNA. It also supports 802.11n, 20 MHz and 40 MHz channels up to 144 Mbps and 300 Mbps respectively, as well as compatible with IEEE 802.11b/g wireless protocols and data rates. The module adopts the OpenWRT operating system. It can support AP mode and client mode at the same time. It contains various application software packages that could reduce customer’s time and efforts for a product development. router core board
Product - ComFi W5850 Outdoor 11AX 3000M Dual Band Wireless AP Product Specifications V1.1
ComFi W5850 is an outdoor 2x2 dual-band WiFi6 wireless AP, suitable for outdoor areas that require wireless coverage such as scenic spots, parks, schools, and squares. ComFi W5850 supports 2x2 11ax, and the maximum concurrent connection rate of dual-band can reach up to 3000Mbps, which can build a stable and high-speed wireless network for users. ComFi W5850 has high-performance wireless indicators, can get a larger wireless coverage area and better wall penetration performance. ComFi W5850 supports the access of up to hundreds of wireless terminals to meet the application scenarios of high-density wireless terminals. At the same time, ComFi W5850 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to easily connect. ComFi W5850 supports standard 48V PoE power supply and pole installation, and the installation and configuration are flexible and convenient. Users only need to spend a short time to complete the settings, you can enjoy the fun of surfing the Internet. Product Features 5G Cellular Network Support 5G NR mobile operator’s networks. It is compatible with 5G networks of major operators in the market and backward compatible with 4G LTE and 3G WCDMA networks. Wi-Fi6 (IEEE 802.11ax) Standard 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience. Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling AP to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac. Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM). Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency. Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference. Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life. Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO) Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios. High-Speed Access Supports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps. 5GHz Priority The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience. High-level Protection It adopts metal shell and overall heat dissipation design, suitable for wide temperature operation of -30°C to +65°C and adopts IP68 waterproof and dustproof design. Ethernet interface supports 5G outdoor CPE 6KA/6KV enhanced lightning protection, fully meet the requirements of industrial-grade use; Reinforced with metal fasteners and cable connectors to ensure connection fastening performance and equipment working stability; Outdoor Access Point External Indicator The external high-bright status indicator light makes the equipment running status clear at a glance, saving troubleshooting time. WiFi 6 Outdoor Wireless Ap
Product - ComFi W2100 Outdoor Wireless AP Product Specifications V1.0
2.4GHz Wi-Fi Radio, IEEE 802.11n, 2T2R IP65 Grade Outdoor Enclosure, Dustproof and Waterproof External 6dBi Omni-Directional Antenna Higher Wi-Fi Power, coverage 100 Meter Radius Power by PoE Power or Standard DC 12V Power 300Mbps Wi-Fi Data Rate and Support 32+ Users
Product - ComFi W500 11AX 3000M Outdoor 5G Wireless CPE Product Specifications V1.0
ComFi W500 is an outdoor 2x2 dual-band WiFi6 wireless AP, suitable for outdoor areas that require wireless coverage such as scenic spots, parks, schools, and squares. ComFi W500 supports 2x2 11ax, and the maximum concurrent connection rate of dual-band can reach up to 3000Mbps, which can build a stable and high-speed wireless network for users. ComFi W500 has high-performance wireless indicators, can get a larger wireless coverage area and better wall penetration performance. ComFi W500 supports the access of up to hundreds of wireless terminals to meet the application scenarios of high-density wireless terminals. At the same time, ComFi W500 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to easily connect. ComFi W500 supports standard 48V PoE power supply and pole installation, and the installation and configuration are flexible and convenient. Users only need to spend a short time to complete the settings, you can enjoy the fun of surfing the Internet. Product Features 5G Cellular Network Support 5G NR mobile operator’s networks. It is compatible with 5G networks of major operators in the market and backward compatible with 4G LTE and 3G WCDMA networks. Wi-Fi6 (IEEE 802.11ax) Standard 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience. Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling AP to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac. Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM). Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency. Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference. Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life. Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO) Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios. High-Speed Access Supports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps. 5GHz Priority The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience. WiFi 6 Outdoor Wireless Ap High-level Protection It adopts metal shell and overall heat dissipation design, suitable for wide temperature operation of -30°C to +65°C and adopts IP67 waterproof and dustproof design. Ethernet interface supports 6KA/6KV enhanced lightning protection, fully meet the requirements of industrial-grade use; Reinforced with metal fasteners and cable connectors to ensure connection fastening performance and equipment working stability; outdoor CPE External Indicator The external high-bright status indicator light makes the equipment running status clear at a glance, saving troubleshooting time. 5G outdoor CPE
Product - ComFi I5800 Industrial Grade 5G WIFI6 Wireless Router Product Specifications V1.0
ComIn I5800 is an industrial grade 5G WIFI6 dual-band wireless router, that integrates multiple functions such as new 5G cellular broadband Internet access, high speed WIFI transmission, serial port pass-thru transmission, and backend remote management. It is based on Qualcomm IPQ5018 chipset solution with 2x2 802.11ax that support data transfer rate up to 3000Mbps and enable to build a stable high-speed wireless network. In addition, ComIn I5800 has high-performance wireless characteristics, which can obtain larger wireless coverage area and better wall penetration performance. ComIn I5800 supports the wireless access of up to hundreds of wireless terminals that satisfy with the application scenario requirements of high-density wireless terminals. At the same time, ComIn I5800 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to connect conveniently. It provides more processing performance, richer interfaces and higher network connection speed than ordinary industrial routers. This product is suitable for different application scenarios, such as vehicle WIFI, video transmission, PLC remote control, intelligent express cabinet, video surveillance, 5G coverage, etc. Product Features Wi-Fi6 (IEEE 802.11ax) Standard 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience. Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling router to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac. Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM). Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency. Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference. Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life. Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO) Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios. High-Speed Access Supports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps. 5GHz Priority The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience. Industrial Design Based on Qualcomm IPQ5018 Chipset Solution Wide voltage input design: 12 ~ 18V Industrial grade software and hardware watchdog design, trouble free and reliable operation in power station, transportation, and industrial control environment application Industrial grade EMC electromagnetic compatibility and radiation performance, passed the GB/T17626.5-2008 Level 4 test standard Industrial grade components, working temperature: -40 ~ +55°C Industrial enclosure, suitable for extreme environments Fan-less heat dissipation technology effectively reduces the failure rate of the equipment SIM card protection design Meet the trouble-free and reliable operation under vibration and shock environment Rugged, Stable and Reliable Apply complete anti-disconnection mechanism that to ensure the end data terminal is always online The product passed EMC test requirements The Ethernet interface built-in 1.5KV electromagnetic isolation protection GB/T17626.5-2008 (Level 4) SIM/UIM interface built-in 1.5KV ESD protection GB/T17626.5-2008 (Level 4) Built-in reserve phase protection and overvoltage protection for the power interface High Speed Cellular Network Support 5G SA (Standalone) and NSA (Non-Standalone) network Backward compatible with 4G Cat18(UL)/Cat20(DL) or Cat12(UL)/Cat13(DL)* Support Band Lock, Base Station Lock 5G Industrial Router Support SIM PIN Code Lock IOT gateway Support Network Mode Lock industrial router
Product - ComFi I500 Industrial Grade 5G WIFI6 Wireless Router Product Specifications V1.0
ComIn I500 is an industrial grade 5G WIFI6 dual-band wireless router, that integrates multiple functions such as new 5G cellular broadband Internet access, high speed WIFI transmission, serial port pass-thru transmission, and backend remote management. It is based on MT7981 chipset solution with 2x2 802.11ax that support data transfer rate up to 3000Mbps and enable to build a stable high-speed wireless network. In addition, ComIn I500 has high-performance wireless characteristics, which can obtain larger wireless coverage area and better wall penetration performance. ComIn I500 supports the wireless access of up to hundreds of wireless terminals that satisfy with the application scenario requirements of high-density wireless terminals. At the same time, ComIn I500 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to connect conveniently. It provides more processing performance, richer interfaces and higher network connection speed than ordinary industrial routers. This product is suitable for different application scenarios, such as vehicle WIFI, video transmission, PLC remote control, intelligent express cabinet, video surveillance, 5G coverage, etc. Product Features Wi-Fi6 (IEEE 802.11ax) Standard 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience. Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling router to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac. Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM). Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency. Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference. Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life. Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO) Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios. High-Speed Access Supports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps. 5GHz Priority The AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience. Industrial Design Based on Qualcomm IPQ5018 Chipset Solution Wide voltage input design: 12 ~ 36V Industrial grade software and hardware watchdog design, trouble free and reliable operation in power station, transportation, and industrial control environment application Industrial grade EMC electromagnetic compatibility and radiation performance, passed the GB/T17626.5-2008 Level 4 test standard Industrial grade components, working temperature: -40 ~ +55°C Industrial enclosure, suitable for extreme environments Fan-less heat dissipation technology effectively reduces the failure rate of the equipment SIM card protection design Meet the trouble-free and reliable operation under vibration and shock environment Rugged, Stable and Reliable Apply complete anti-disconnection mechanism that to ensure the end data terminal is always online The product passed EMC test requirements The Ethernet interface built-in 1.5KV electromagnetic isolation protection GB/T17626.5-2008 (Level 4) SIM/UIM interface built-in 1.5KV ESD protection GB/T17626.5-2008 (Level 4) Built-in reserve phase protection and overvoltage protection for the power interface High Speed Cellular Network Support 5G SA (Standalone) and NSA (Non-Standalone) network Backward compatible with 4G Cat18(UL)/Cat20(DL) or Cat12(UL)/Cat13(DL)* Support Band Lock, Base Station Lock 5G Industrial Router Support SIM PIN Code Lock industrial router Support Network Mode Lock IOT gateway
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.